Home / Applications / Transportation
Application / Transportation

Yards, shops, and fuel islands run all night. Cut what they burn.

Long hours, load security, and driver safety make transportation facilities a strong retrofit target. We handle the varied applications, from fuel-island canopies to shops and dispatch, and cut both energy and maintenance.

Get a Free Site Assessment
In your words

Where the yard is losing money.

The yard runs all night

Lots, fuel islands, and canopies are on long hours. Long run times are exactly where LED plus controls pay back fastest.

Security and safety ride on the light

Load theft, driver safety, and worker safety all track with how well the yard and shops are lit. Gaps are liability.

Every area is a different fixture

Fuel islands, maintenance shops, truck lots, dispatch, oil pits. Varied applications are hard to maintain and drive cost up.

What we do for you

Everything a transportation facility needs, from one team.

Photometric audit

We measure actual light levels and count what you have, then design to the foot-candles your work demands, not a guess.

Controls that multiply savings

Occupancy sensing, daylight harvesting, and high-low dimming in aisles that sit empty half the shift. Where good becomes great.

A real ROI model

Energy, maintenance, and rebate modeled together so you see payback and first-year return before you commit a dollar.

Install around your shifts

Our own crews phase the work aisle by aisle, off-hours if needed, so production never stops. No subs, no surprises.

Utility rebates, handled

We identify the program, file the paperwork, and follow the utility to approval. You get the check, not the runaround.

Warranty for the long haul

If a fixture fails years out, we manage the manufacturer claim end to end. One number to call, still us.

The signature process

Seven steps. One owner. No handoffs to a subcontractor.

The two shaded gold are the steps most vendors skip or outsource, and they are where the money is.

01

Site audit & photometric baseline

On-site measurement of light levels, fixture count, and layout.

02

Written scope

A documented plan you can hold us to, not a verbal promise.

03

Fixture & controls recommendation

Device agnostic. The right product for your specs, not our inventory.

04

ROI model

Energy, maintenance, and rebate modeled to a real payback number.

05

Phased install plan

Sequenced around production so the floor keeps running.

06

Utility rebate handling

Paperwork filed and chased to approval on your behalf.

07

Warranty claim management

End-to-end for years after the last fixture goes in.

Multi-site & national

One spec, one crew model, one number, across every yard.

Rolling out across 5 yards or 300, you get a standardized scope, a rebate playbook mapped to each utility, and a single point of accountability from audit through warranty, so every location lands the same result.

One standardized spec

The same fixtures, controls, and light levels rolled across every yard, so results are consistent and comparable site to site.

A rebate playbook per utility

Every yard sits in a different utility territory. We map the program for each one and file it, so no incentive is left on the table.

One point of accountability

One team, one contract, one number to call, from the first audit through install, rebate, and warranty on every yard.

Proof in this space

Transportation work we have delivered.

Real retrofits in this facility type. The full portfolio, filterable by application, lives on the Projects page.

Knight Transportation
Exterior LightingTransportation

Knight Transportation

4 terminals · El Paso TX · Portland OR · Katy TX · Plainfield INView case study →
RWC International
Exterior LightingTransportation

RWC International

2 facilities · Phoenix, AZ

More Transportation projects load in as we add them to the roster.

See all projects
Questions we get

What fleet and terminal teams ask first.

Can you upgrade parking lot and site lighting? +
Yes. We replace pole, wall pack and flood fixtures, add dusk-to-dawn controls, and offer solar poles where running power is costly.
How much energy does an LED retrofit save? +
Most of our projects cut lighting energy 50 to 90 percent, depending on the existing fixtures and whether controls are added. Harbor Freight's Moreno Valley campus cut about 91 percent across five buildings.
Can you work without shutting down operations? +
Yes. Crews work by zone and around shifts, and we coordinate lifts and traffic with your operations team.
Do you handle utility rebates? +
Yes. We find, file and track the applications. On Cardinal Health's 12-site program we captured $195K in rebates.
Can you run a multi-site or national rollout? +
Yes. We work in all 50 states under one contract for engineering, procurement and installation. SanMar used us across four sites and 3.3M+ sq ft.

More questions and answers →

Free site assessment

Get your real numbers.

The estimator gives you a ballpark. This gets you a photometric audit, a written scope, and a rebate-adjusted ROI model, at no cost and no obligation.

  • A free photometric audit of your facility
  • A written, fixture-by-fixture scope of work
  • A rebate-adjusted ROI model with real payback
  • No cost and no obligation

By submitting you agree to be contacted about your project. We never sell your data.